VersaTuner is tuning software for Mazda vehicles. It is a Windows application that allows reflashing/remapping (chip tuning) of Gen 3 Mazda3 engine ECUs, data logging, tune editing and diagnostics.
Unlike other apps that target only professional tuners, VersaTuner makes Gen 3 Mazda3 2.2l SkyActiv-D diesel tuning accessible to everyone. Included dyno-tested prebuilt tunes allow adding horsepower or increasing fuel economy with just a few clicks. More experienced users can use the Tune Editor to get access to dozens of adjustable engine tables, maps and parameters. Professional tuners can use VersaTuner Professional to tune multiple vehicles and build locked and encrypted tunes that protect their Mazda tuning know-how.
VersaTuner can be ordered globally and can be downloaded immediately after purchasing. All you need is a Windows laptop or tablet, a compatible hardware interface (cable) to connect your computer to the car and you can start tuning your Gen 3 Mazda3 today.
Increased power to 192hp on stock vehicles. Stock EGT limits are in place. Can be applied to 150hp and 175hp ECUs.
Horsepower and torque are increased above the 175hp stock tune. Can be applied to 150hp and 175hp ECUs.
Upgrades 150hp SkyActiv Diesel ECU to stock 175hp SkyActiv Diesel ECU power level
Prevents the engine from starting
Reduced torque (270 Nm)
Full version of VersaTuner includes a tune editor that allows you to change the aspects of your Mazda ECU operation related to power delivery and fuel efficiency. Tuning your Gen 3 Mazda3 ECU is done by changing the tables and constants that the ECU uses internally to calculate load targeting, fueling, injection, ignition, interpret sensor values, etc.
A list of all currently available tables and constants (also known as maps) for tuning the Gen 3 Mazda3 ECU is provided below. As we continue to analyze the ECU logic and develop new tunes, we may make new maps available.
NOTE: The exact list of tables available for your car may vary depending on the ECU manufacturer and software version.
When you need to analyze how your Mazda performs before or after ECU tuning, you will drive the car and record the values of different parameters. All editions of VersaTuner (even Free!) include important Mazda-specific logging parameters that are available to official Mazda service centers and are not usually included in cheap universal logging devices or apps.
Here is a list of all currently available data logging parameters (also known as PIDs) for your Gen 3 Mazda3.
|2015 Mazda 6 2.2l SkyActiv Diesel 150 HP version
SkyActiv-D upgrade from 150hp to 175hp
Mazda 6 (GJ) SkyActiv-D Base
Download the demo version based on full version features available for Mazdaspeed6/Mazda 6 MPS.
The demo does not connect to the car, it only lets you evaluate the user experience.
VersaTuner comes in different editions. You can choose the one that works best for you:
Contact us to learn more about special terms, pricing and collaboration possibilities.
IMPORTANT! Chinese Mini-VCI/MVCI J2534 vehicle interfaces (cables) are known to brick the ECU when flashing. Do NOT use them with VersaTuner.
|Personal, flashing limited to one car (specific VIN)
Contact for multi-VIN licensing options.
|Install on multiple computers:
|Free minor updates:
|Transfer license to the future owner of your car:
|Transfer license to another car:
|(certain exceptions apply, contact us for details)
|Supported hardware interfaces (wired):
|Supported hardware interfaces (wireless):
|OBD-II port on the car, USB port or Bluetooth on the computer
|No ECU removal necessary:
|No need to splice wires:
|Time for initial installation on the car:
|around 30-60 minutes
|Time for each subsequent reflash:
|around 2-4 minutes
|Automatic recovery after flashing failure:
|Automatic backup of stock calibration:
|Possibility to go back to stock calibration:
|Number of guaranteed reflashes:
|100+ (depending on the ECU)
|Number of modifiable tables:
|Sophisticated boost control:
|Variable valve timing control:
|Fuel pressure control:
|Idle RPM control:
|Rev limiter control:
|Speed limiter control:
|Compatibility with non-US ECUs:
|No lift shifting:
|200 samples/second (on VersaLink)
|Smart logging resolution management:
|30+, including Mazda-specific
|Visual and audible, configurable thresholds
|Only limited by disk space
|Number of generic DTCs recognized:
|Number of Mazda-specific DTCs recognized:
|Read/clear codes from other modules: