VersaTuner is tuning software for Mazda vehicles. It is a Windows application that allows reflashing/remapping (chip tuning) of Gen 3 Mazda MX-5 Miata engine ECUs, data logging, tune editing and diagnostics.
Unlike other apps that target only professional tuners, VersaTuner makes Gen 3 Mazda MX-5 Miata 1.8l MZR LF-VE tuning accessible to everyone. Included prebuilt tunes (not available in BETA) allow adding horsepower or increasing fuel economy with just a few clicks. More experienced users can use the Tune Editor to get access to dozens of adjustable engine tables, maps and parameters. Professional tuners can use VersaTuner Professional to tune multiple vehicles and build locked and encrypted tunes that protect their Mazda tuning know-how.
VersaTuner can be ordered globally and can be downloaded immediately after purchasing. All you need is a Windows laptop or tablet, a compatible hardware interface (cable) to connect your computer to the car and you can start tuning your Gen 3 Mazda MX-5 Miata today.
There are NO prebuilt tunes included.
You can build tunes yourself using the full version of VersaTuner or you can contact an e-Tuner to have a tune built for you. Prebuilt performance and special tunes will be added at a later time. All existing customers will get access to them at no extra charge.
VersaTuner has been carefully designed to be easy to understand for first time users and at the same time allows experienced tuners to work efficiently. All features are accessible from one Windows app with a sleek and modern user interface. Guides and wizards lead you through the important processes. The UI is optimized both for touch-based use on tablets as well as laptops and desktop PCs.
VersaTuner is a true reflashing (remapping/chip tuning) solution for the Gen 3 Mazda MX-5 Miata, not a "piggyback" controller. No wires need to be spliced and all built-in safety features of the ECU are retained. It uses the same flashing methods that are used by dealerships when updating your ECU. Built in recovery feature can flash the ECU even in the unlikely event of power failure. Your stock calibration is backed up, so you can go back to stock at any time.
Once support for Gen 3 Mazda MX-5 Miata (1.8l MZR LF-VE) is finalized, a number of prebuilt tunes tunes will be available right from the app. If you have a stock or mildly modified vehicle, you will be able to flash a suitable tune with a couple of clicks and enjoy. All our tunes can be downloaded and edited and serve as a great starting point for custom or high power tunes. With our prebuilt tunes, Gen 3 Mazda MX-5 Miata tuning has never been easier!
VersaTuner includes an advanced tune editor allowing you to edit a multitude of tables, maps and constants and customize existing or create custom tunes for your Gen 3 Mazda MX-5 Miata. It comes with a ton of productivity features, such as tune comparison, visualization, interpolation and automated translation of descriptions to 110+ languages.
Virtual dashboard allows you to view and record all the vital engine parameters simultaneously. Analyze recorded logs later using a graphical log viewer or export them to Excel or Virtual Dyno.
Read and clear DTCs from multiple modules, not just your engine ECU. A vast number of standard and Mazda-specific DTCs is supported.
VersaTuner allows you to safely and easily increase the horsepower and torque of your engine. That results in faster launches and better 0-60/0-100 times.
After driving a tuned car you will never want to go back to stock again!** going back to stock only takes a couple of minutes with VersaTuner, when needed
Have you fitted an uprated intake or intercooler? A bigger turbo and exhaust?
On modern cars, upgrading parts alone will not have a significant effect unless accompanied by changes in ECU tuning. VersaTuner allows you to realize the full potential of your mods. Update the tune easily as you add new parts in the future.
Do you have a full race car with minimal electronics? You can disable the immobilizer and run the engine without supporting modules like keyless entry or ignition key switches.
Support for this vehicle model is still in BETA stage and there are no prebuilt tunes available. Tunes will be added at a later time and all existing customers will get access to them at no extra charge.
In the meantime, tunes can be built using the full version of VersaTuner or purchased from authorized e-tuners.
Full version of VersaTuner includes a tune editor that allows you to change the aspects of your Mazda ECU operation related to power delivery and fuel efficiency. Tuning your Gen 3 Mazda MX-5 Miata ECU is done by changing the tables and constants that the ECU uses internally to calculate load targeting, fueling, injection, ignition, interpret sensor values, etc.
A list of all currently available tables and constants (also known as maps) for tuning the Gen 3 Mazda MX-5 Miata ECU is provided below. As we continue to analyze the ECU logic and develop new tunes, we may make new maps available.
NOTE: The exact list of tables available for your car may vary depending on the ECU manufacturer and software version.
When you need to analyze how your Mazda performs before or after ECU tuning, you will drive the car and record the values of different parameters. All editions of VersaTuner (even Free!) include important Mazda-specific logging parameters that are available to official Mazda service centers and are not usually included in cheap universal logging devices or apps.
Here is a list of all currently available data logging parameters (also known as PIDs) for your Gen 3 Mazda MX-5 Miata.
Download the demo version based on full version features available for Mazdaspeed6/Mazda 6 MPS.
The demo does not connect to the car, it only lets you evaluate the user experience.
VersaTuner comes in different editions. You can choose the one that works best for you:
Contact us to learn more about special terms, pricing and collaboration possibilities.
IMPORTANT! Chinese Mini-VCI/MVCI J2534 vehicle interfaces (cables) are known to brick the ECU when flashing. Do NOT use them with VersaTuner.
|License type:||Personal, flashing limited to one car (specific VIN)
Contact for multi-VIN licensing options.
|Install on multiple computers:|
|Free minor updates:|
|Transfer license to the future owner of your car:|
|Transfer license to another car:||(certain exceptions apply, contact us for details)|
|Supported hardware interfaces (wired):||
|Supported hardware interfaces (wireless):||
|Connection method:||OBD-II port on the car, USB port or Bluetooth on the computer|
|No ECU removal necessary:|
|No need to splice wires:|
|Flashing method:||ISO/SAE standard|
|Time for initial installation on the car:||around 30-60 minutes|
|Time for each subsequent reflash:||around 2-4 minutes|
|Automatic recovery after flashing failure:|
|Automatic backup of stock calibration:|
|Possibility to go back to stock calibration:|
|Number of guaranteed reflashes:||100+ (depending on the ECU)|
|Number of modifiable tables:||100+|
|Air/fuel mixture control:|
|Ignition timing control:|
|Variable valve timing control:|
|Idle RPM control:|
|Rev limiter control:|
|Speed limiter control:|
|Compatibility with non-US ECUs:|
|No lift shifting:|
|Logging speed:||50 samples/second (on VersaLink)|
|Smart logging resolution management:|
|Measurable parameters:||30+, including Mazda-specific|
|Measurement units:||Fully customizable|
|Alerts:||Visual and audible, configurable thresholds|
|Logging duration:||Only limited by disk space|
|Number of generic DTCs recognized:||4000+|
|Number of Mazda-specific DTCs recognized:||1400+|
|Read/clear codes from other modules:|